Table 2: Other printing problems
Problem Solution
An image is printed on the reverse
side of the paper.
Reload the paper in the paper tray upside down.
Multiple pages are fed through the
copier at once.
Remove all the pages from the paper tray and fan them gently
before reloading.
Paper misfeeds occur frequently.
Check the paper size settings. Use the recommended paper.
Avoid using curled, folded, wrinkled, perforated, or glossy
paper.
It takes too long to complete the print
job.
The data is so large or complex that it takes additional time to
process. If the Data indicator is blinking, data is being
processed. Wait until it is finished.
Errors and Suggested Actions
181
To Next Page
