Machine Installation
Setting Customer Expectations
Before installation, the customer should be informed of the following:
•
Some nodes on the network may be unavailable for up to one hour.
• The copier may be unavailable for up to one hour
• The site administrator should be available during the installation for assistance with network
connectivity issues.
• Equipment downtime and impact on the network can be minimized if the site administrator installs a
network node for the E-24B and confirms network connection for the E-24B installation.
• The site administrator should have a networked computer available during the installation. The
appropriate software should already be installed. Documentation for the networked computer and
the network operating software should be available.
• The site administrator should install the user software shipped with the E-24B (user documentation is
also included) onto the networked PCs and Mac OS computers that will print to the E-24B.
• This guide covers hardware installation and service. It provides general information on connecting
the E-24B to the customer's network. For network setup and configuration information, refer the site
administrator to the "Configuration and Setup" manual (http://help.efi.com/ricoh/docs/).
Unpacking the E-24B
1. Open the box and remove the packing material.
Machine Installation
11
To Next Page
