Ricoh E-24B - Confirming the Activated Options

If the E-24B is not connected to the Internet, manual steps are required to transfer data between the
E-24B and the EFI licensing website using another PC that is connected to the Internet.
1.
A PC that can access to the E-24B with web browser.
2. Another PC that can connect to the internet with web browser is needed.
• The above two PCs can be as same single PC (by switching the roles by changing the
location/connection).
<Client Options>
If the PC where the optional feature will be installed, your PC is not connected to the Internet,
manual steps are required to transfer data between the PC and the EFI licensing website using
another PC that is connected to the Internet.
1.
A PC where the optional feature will be installed, must be connected to E-24B with the
Command WorkStation.
2. Another PC that can access to the Internet is needed.
• The above two PCs can be the same single PC (by switching the roles by changing the
location/connection).
Confirming the Activated Options
<Server Options>
There are three ways to confirm the activated options for a particular unit of E-24B.
1.
Print the configuration sheet.
[Link to page 65 "Printing the Configuration Page or Test Sheets"]
2. Confirm from WebTools.
Launch the web browser and enter the IP address of E-24B in the URL column to execute the Web
Tools.
Click the Home tab and confirm the installed options.
Installing Optional Features
29