Ricoh FW770 - Programming Setting You Often Use; A) Program Key

33
PROGRAMMING SETTING YOU OF TEN USE
There are two ways of programming settings you often use.
A) Store the settings in the Program key. When you press this key, the settings will be restored
instantly.
B) Change the default settings to those you use most frequently. Whenever you turn on the
machine or press the Clear Modes key, these settings will be ready to use.
Notes
p The number of copies is not stored in the Program key
.
1 Press the Program key.
2 Input the settings you want to store.
3 Make a copy, then press the Program key.
1 Press the Program key before copying.
2 Enter the number of copies required with the
plus and minus key.
3 Make a copy.
Storing Setting In The Program Key
A) Program key
Recalling Settings Stored In The Program key
Copy Media Lighter
Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Wait
Vellum
Film
Lighter Copy
Set
Original
Energy
Saver
Copy Media Lighter
Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Wait
Vellum
Film
Lighter Copy
Set
Original
Energy
Saver