p
While copying, do not unplug the power cord.
p
Keep corrosive liquids, such as acid, off the machine.
p
Do not allow paper clips, staples, or other small metallic objects
to fall inside the machine.
General Safety Information
p
Always turn the copier off when you’ve finished copying for the
day, but leave it plugged in.
p
When the copier will not be used for a long period, disconnect
the power cord.
p
If the copier must be transported by vehicle, please contact your
service representative.
p
This copier can only be installed by a qualified service repre-
sentrative.
p
When the copier is plugged in and the main switch is in the
Stand-by position, the anti-condensation heaters are on. In
case of an emergency, unplug the copier’s power cord.
ii
To Next Page
Loading...
