MAINTAINING YOUR COPIER
Changing The Toner Bottle
WARNING: You must change the toner bottle whenever you see
FULL in the copy counter.
NEVER clear this condition by
only
opening
and closing the copier or turning it on and off.
If the toner bottle overflows, toner particles could get inside the copier
and cause damage. When you install a new bottle make sure it is per-
fectly set in its holder. Follow the steps below.
1. Open the upper unit of the copier.
2. Open the door on the right side
of the copier.
3. Carefully remove the plastic bot-
tle and throw it away.
WARNING: Do not incinerate used toner.
Toner dust can ignite suddenly.
18
To Next Page
Loading...
