61
5. Troubleshooting
If Something Goes Wrong
If you have problems with your copier, consult the following pages. If a service
indicator lights up, read the following section. If the original or copy is stuck in
the copier; ⇒ P.63; if the copier won't start, or if copies don't look right, ⇒ P.71.
If Indicator Lights Up
If one of the indicators shown appears on the operation panel, turn to the appro-
priate page and follow the instructions described there.
What ap-
pears
What it
means
What to do
x The origi-
nal or copy
paper is
jammed
some-
where.
See the fol-
lowing sec-
tion.
L The copier
needs a
technician.
Call your
service rep-
resentative.
M A cover
,unit, or the
fusing unit
cover was
left open.
Close it.
Press firm-
ly.
C The paper
roll is fin-
ished.
Put in a
new roll of
paper.
⇒
P.56.
D The toner
cartridge is
empty, or
almost
empty.
Replace the
toner car-
tridge.
⇒
P.50.
c Wait until
the ready
indicator
lights.
Wait. If it
stays on for
an unusu-
ally long
time, call
your serv-
ice repre-
sentative.
To Next Page
Loading...
