Ricoh FW770 - Using the Rear Table

18
When you copy the following originals, set them in the Rear Table.
• Thick originals (0.19mm, 35µ ∼ 1mm).
• Originals which cannot be folded.
• Originals less than 297mm (12”) in width and more than 1200mm (47”) in length.
Notes
p You cannot use the following function using the Rear Table.
Repeated Copying
Semi Synchro Cut with roll paper
Partial Copying
1 Choose any copy setting you require.
2 For mannual copying, set paper.
3 Pull up the holder and turn in the copy exit
guide.
4 Insert the original
face down from the Rear
Table.
5 Hold and take the original which has been
read and delivered in the front of the copier.
Using the Rear Table
SB012
SB013