Ricoh FW770 - Using the Rear Table

Basic Copying (Copying to sheets)
19
2
G
The original is fed through to the rear table.
H
When the original is being sent back, the machine reads the original and
starts copying.
With Repeated Copying, the original is repeatedly fed through and sent back
until all copies have been made.
I
Copies are delivered at the rear of the machine.
Using the Rear Table
Set thick originals or originals less than 297(11”)mm in width and more than
1,200( 48”)mm in length on the rear table.
Note
❒ You cannot use the following functions when using the rear table.
• Repeated Copying