Ricoh FW770 - Variable Cutting

23
Variable Cutting
Paper Length
Semi Synchro
Preset/
Variable
Leading Edge
Copy Counter
Function Select
RF Select/Cut Copy Media Lighter
Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Set
Paper
RF
Select
Wait
Vellum
Film
Cut Select
Preset Cut
Lighter Copy
Set
Original
Energy
Saver
This function cuts roll paper in a length you specify.
Notes
p The variable cut can handle the cut length from 245 to2,000mm,9.6”to 78.7”.
1 Press the Preset Cut key. The “Preset/Variable” indicator lights up and the “Paper Length”
display shows the default Preset Cut length. (1189mm, or 48.0”).
2 Press the Preset Cut key to display the nearest value you want.
3 Press + key or - key to specify the most appropriate length.
4 Choose any copy settings you require.
5 Press the RF select key to turn on the “RF Select” indicator.
6 Continue from step4 of P. 20.