Ricoh FW770 - B) Changing the Default Setting

35
1 Press the Program key before copying.
2 Enter the number of copies required with the
plus and minus key.
3 Make a copy.
1 Turn the main switch off.
2 Hold down the Emergency Stop key, then
turn the copier back on.
The jam and service indicators will blink.
3 Input the settings you want.
4 Turn the main switch off.
The next time you turn the copier on or press the Clear Modes key, the settings you programmed
in step 3 will take effect.
Recalling Settings Stored In The Program key
B) Changing The Default Setting
Copy Media Lighter
Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Set
Paper
RF
Select
Wait
Vellum
Film
Lighter Copy
Set
Original
Energy
Saver
Copy Media Lighter
Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Set
Paper
RF
Select
Wait
Vellum
Film
Lighter Copy
Set
Original
Energy
Saver