10
RECOMMENDED PAPER
p Standard paper sizes that can be used in this copier are shown below.
p When you make a copy on a non-standard size of paper, set the paper in the Bypass.
p Weight of paper suitable for this copier: 51g/m
2
, 14lb to 134g/m
2
, 36lb.
p Do not use the following kinds of paper or a paper jam might occur.
• Bent, folded, or creased paper
• Torn paper
• Perforated paper
• Non-smooth paper
• Slippery paper
• Thin paper that has low stiffness
p Do not make a copy on paper with any kind of coating, such as thermosensitive paper, art
paper, aluminium foil, and carbon paper.
A fault might occur.
p Do not use paper with strong curls at the edges or corners. (Curls rising more than 5mm (1/4”)
or falling more than 20mm (3/4”) over a 40mm (1.5”) radius.)
p When you make copies on film, take out the copies delivered to the copy guide one sheet at a
time and place them on a flat surface.
noisrevcirteMnoisrevhcnIssapyBredeeFlloR
0A)"84×"63(E
1A)"63×"42(D
2A)"42×"81(C
3A)"81×"21(B
4A)"21×"9(A
To Next Page
Loading...
