36
USER TOOLS
Access the User Tools to make the following adjustments:
A1) Not in use
A2) Semi Synchro Cut Adjustment; Allows you to adjust the cut length.
–25 ~ +25mm (–1.0” ~ –1.0”) (by 1mm, or 0.1")
Without the Roll Feeder, A2) is not in use.
1 Hold down the Program key for at least 3
seconds.
“A.1” blinks on the “Copy Counter” display.
2 Press + key, “A2” blinks on the display
3 Press the Function Select key.
The “Paper Length” display shows the
current value.
4 Use the + and – key to change the value
5 Press the Program key to return to step 2.
6 Press the Clear Modes key to exit this mode.
Copy Media
Lighter
Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Set
Paper
RF
Select
Wait
Vellum
Film
Lighter Copy
Set
Original
Energy
Saver
Paper Length
Semi Synchro
Preset/
Variable
Leading Edge
Copy Counter
Function Select
RF Select/Cut
Cut Select
Preset Cut
To Next Page
Loading...
