64
p Connect the copier to a power source meeting the specifications given on the inside front cover
of this manual.
p Do not set anything on the power cord.
p Voltage must not fluctuate more than 10%.
p Make sure the copier is grounded.
p Make sure the plug is firmly inserted into the power outlet.
p Make sure the power outlet is close to the copier and easily accessible at all times.
Place the copier near a power source and provide clearance as shown.
Back
600 mm (24”)
Left
600 mm
(24”)
Front
1000 mm (40”)
Access To Machine
Right
600 mm
(24”)
To Next Page
Loading...
