• See below when [Standard] is specified as the screen type of [Settings]. The names of the
setting items may differ from the [Classic] screen type.
See "Date/Time/Timer", User Guide (Full Version).
For details, see "Settings Menu Compatibility List (Classic to Standard Settings)", User Guide
(Full Version).
• In this mode, you can scan documents, send faxes, receive faxes into memory, change the
machine settings on the control panel, and perform other operations that do not require
printing.
Sleep Mode
In this mode, the display of the control panel turns off and the main power indicator blinks slowly.
Power consumption is minimized. When you do not operate the machine for a specified period of
time or press [Energy Save] ( ), the machine enters Sleep mode.
• You can specify the amount of time that the machine waits before entering Sleep mode under
[Sleep Mode Timer].
See "Timer Settings", User Guide (Full Version).
• See below when [Standard] is specified as the screen type of [Settings]. The names of the
setting items may differ from the [Classic] screen type.
See "Date/Time/Timer", User Guide (Full Version).
For details, see "Settings Menu Compatibility List (Classic to Standard Settings)", User Guide
(Full Version).
• The machine recovers from Sleep mode when you perform one of the following:
• Lift the ADF.
• Place an original in the ADF.
• Touch the display of the control panel.
• Approach the machine and are detected by the human detection sensor.
See "Recovering from Sleep Mode When a Person Approaches the Machine", User
Guide (Full Version).
• The energy saving functions are disabled when an error occurs or while an operation is in
progress.
• When the machine recovers from Sleep mode using the human detection sensor, the main power
indicator turns on. Even if Sleep mode is canceled, the operation screen is not displayed until you
touch the touch panel.
Turning On and Off the Power
13
To Next Page
Loading...
Need help?
General
