Ricoh MP 402SPF Service Manual

5.System Maintenance
189
3. You can see the “Remaining Days for each part”.
How to Use the Firmware Update
For details about how to use the Firmware Update, refer to Package Firmware Update.
Remarks
The maximum number of characters on the control panel screen is limited to 30. For this reason, some of the SP modes
shown on the screen have been abbreviated. The following are abbreviations used for the SP modes for which the full
description is over 20 characters.
Item
Description
Paper Weight
Thin paper: 52-59 g/m
2
, 13.9-15.7lb.
Plain Paper1: 60-74 g/m
2
, 16-19.7lb.
Plain Paper2: 75-81 g/m
2
, 20-21.6lb.
Middle Thick: 82-105 g/m
2
, 21.9-28lb.
Thick Paper1: 106-157 g/m
2
, 28.3-41.9lb.
Paper Type
N: Normal paper
MTH: Middle thick paper
TH: Thick paper
Paper Feed Station
P: Paper tray
B: Bypass tray
Print Mode
S: Simplex
D: Duplex
Others
The settings of each SP mode are explained in the right-hand column of the SP table in the following way.
[Adjustable range / Default setting / Step] Alphanumeric

Ricoh MP 402SPF Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	1, 600 sheets
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Fax Capability	Yes
Maximum Paper Size	A4
Warm-up Time	21 seconds
Memory (RAM)	2 GB
Fax Transmission Speed	33.6 Kbps
Copy Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet, Wi-Fi
Control Panel	Touchscreen
Mobile Printing	Yes
Hard Disk Drive	320 GB (Optional)
Network Connectivity	Ethernet
Print Speed	Up to 42 ppm (Letter)
Copy Speed	Up to 42 cpm (Letter)