Ricoh MP 402SPF Service Manual

2.Installation
29
Paper Feed Unit PB1060/ Paper Feed Unit PB1070
 When lifting the machine, use the inset grips on both sides. The machine could break or cause an injury if
dropped.
Component Check
To attach two lower paper trays at the same time, first stack one paper tray on the other, and then attach them as a
single unit.
Check the quantity and condition of the accessories against the following list.
Paper Feed Unit PB1070 (500 Sheets M440)
No.
Description
Q’ty
1
Installation Procedure
1
2
Manufacturer Information / Authorized Representative Information (Paper)
1
Paper Feed Unit PB1060 (250 Sheets M441)
No.
Description
Q’ty
1
Installation Procedure
1
2
Manufacturer Information / Authorized Representative Information (Paper)
1
3
Paper size decal / Paper tray number decal
1
Installation Procedure
 Turn off the main power switch of the machine and unplug the power cord before you start the installation
procedure.
 To attach two lower paper trays at the same time, first stack one paper tray on the other, and then attach
them as a single unit.
1. Remove the packaging from the lower paper tray.
2. Lift the machine slowly using the inset grips on both sides, and then position it immediately above the lower paper
tray.

Ricoh MP 402SPF Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	1, 600 sheets
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Fax Capability	Yes
Maximum Paper Size	A4
Warm-up Time	21 seconds
Memory (RAM)	2 GB
Fax Transmission Speed	33.6 Kbps
Copy Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet, Wi-Fi
Control Panel	Touchscreen
Mobile Printing	Yes
Hard Disk Drive	320 GB (Optional)
Network Connectivity	Ethernet
Print Speed	Up to 42 ppm (Letter)
Copy Speed	Up to 42 cpm (Letter)