Ricoh MP 402SPF Service Manual

3.System Maintenance
35
3. System Maintenance
System Maintenance
Maintenance Modes
Service program (SP) modes for the Smart Operation Panel are as follows:
Mode
Use
Notes
SP Mode (MFP)
SP modes for the MFP (controller,
engine)
The numeric keys are required to enter this mode.
Display the soft keys of the GW application or of the SP
mode.
Service mode
(control panel)
SP modes for the Smart Operation
Panel.
 Changing SP mode settings in
the Screen Features menu.
 Installing and updating
applications that can be
installed
Same as above
Recovery mode
Maintenance modes for the Android
OS
 Updating firmware
 Initializing all data
-
Login to/Logout from Control Panel Service Mode
Login
In the same way as you log in to the SP Mode on the MFP, you use the soft keys to enter a combination of numbers in
order to login to the service mode of the control panel.
 You cannot log in to the service mode of the control panel when one of the following screens is displayed.
 Stop All Jobs
 User Tools
 Address Book Management
Use the numeric keys on one of the following screens.
 Soft keys on the GW application screen
 Soft keys for the control panel’s service mode (displayed by pressing both the [EX3] key and [Check Status] at the
same time)

Ricoh MP 402SPF Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	1, 600 sheets
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Fax Capability	Yes
Maximum Paper Size	A4
Warm-up Time	21 seconds
Memory (RAM)	2 GB
Fax Transmission Speed	33.6 Kbps
Copy Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet, Wi-Fi
Control Panel	Touchscreen
Mobile Printing	Yes
Hard Disk Drive	320 GB (Optional)
Network Connectivity	Ethernet
Print Speed	Up to 42 ppm (Letter)
Copy Speed	Up to 42 cpm (Letter)