Ricoh MP 402SPF Service Manual

5.System Maintenance
228
 The machine will automatically reboot itself.
 The figures at the lower right of the display indicate “Number of updated items/ All items to be
updated”.
Update via SD card
Update with an SD card, which is the conventional method, is available if you write the package firmware to the SD card.
 If an error code is displayed, refer to Error Screens During Updating.
1. Create a new folder in the SD card, and then name it “package”.
2. Copy the package firmware (xxxxxxxx.pkg) to this folder.
 If you copy the package firmware into the conventional “romdata” folder, the update will not work.
 Only one version of the package firmware should be copied into the folder. If you copy multiple

Ricoh MP 402SPF Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	1, 600 sheets
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Fax Capability	Yes
Maximum Paper Size	A4
Warm-up Time	21 seconds
Memory (RAM)	2 GB
Fax Transmission Speed	33.6 Kbps
Copy Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet, Wi-Fi
Control Panel	Touchscreen
Mobile Printing	Yes
Hard Disk Drive	320 GB (Optional)
Network Connectivity	Ethernet
Print Speed	Up to 42 ppm (Letter)
Copy Speed	Up to 42 cpm (Letter)