Ricoh MP 402SPF Service Manual

2.Installation
31
Controller Options
Overview
 Always touch a grounded surface to discharge static electricity from your hands before you handle SD cards,
printed circuit boards, or memory boards.
The machine is equipped with a USB host interface, I/F card slot, and SD card slots for controller options.
Remove the SD card slot cover to use the SD card slots.
USB Host Interface
Use the USB host interface [A].
I/F Card Slot
Slot [B] can be used to attach an interface for IEEE 1284, IEEE 802.11 (Wireless LAN), USB Device Server Option,
Extended USB Board, or File Format Converter.
SD Card Slots
Slot 1 (upper) [C] is used for optional applications (for example, Fonts, XPS Direct Print, OCR Unit).
Slot 2 (lower) [D] is used for installing applications, or for service only (for example, updating the firmware).

Ricoh MP 402SPF Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	1, 600 sheets
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Fax Capability	Yes
Maximum Paper Size	A4
Warm-up Time	21 seconds
Memory (RAM)	2 GB
Fax Transmission Speed	33.6 Kbps
Copy Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet, Wi-Fi
Control Panel	Touchscreen
Mobile Printing	Yes
Hard Disk Drive	320 GB (Optional)
Network Connectivity	Ethernet
Print Speed	Up to 42 ppm (Letter)
Copy Speed	Up to 42 cpm (Letter)