Ricoh MP 402SPF Service Manual

7.Detailed Descriptions
334
Envelope Lever
The envelope lever [A] is mounted on the right of the fusing unit. Lowering the lever decreases the fusing pressure (to
approximately 20% of normal fusing pressure) to reduce wrinkles on envelopes. Since the machine does not have a
sensor to detect the position of this lever, be sure to raise the lever to its original position after printing on envelopes.
Before being shipped from the factory, the envelope lever is lowered to prevent deformation of the hot roller. Keep the
envelope lever lowered when not using the machine for a long period (Rough indication: Approx. 2 weeks).
Parts Layout
1. Thermostat (185°C)
2. Thermistor (Center)

Ricoh MP 402SPF Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	1, 600 sheets
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Fax Capability	Yes
Maximum Paper Size	A4
Warm-up Time	21 seconds
Memory (RAM)	2 GB
Fax Transmission Speed	33.6 Kbps
Copy Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet, Wi-Fi
Control Panel	Touchscreen
Mobile Printing	Yes
Hard Disk Drive	320 GB (Optional)
Network Connectivity	Ethernet
Print Speed	Up to 42 ppm (Letter)
Copy Speed	Up to 42 cpm (Letter)