Ricoh MP 402SPF Service Manual

4.Appendices: Software Configuration
185
Case
Destination
selection
User auth.
Account used to access the folder
A
Manual entry
Either enabled or
disabled
The user's account *
B
Destination list
disabled
The recipient's account
(as configured in the Address Book's Folder Authentication
setting)
C
enabled
If SP 5-846-021 =
0 (default): The authenticated user's account
1: The recipient's account
(as configured in the Address Book's Folder Authentication
setting)
* The "user's account" will be either the one entered during scanning (see the Manual Entry screen capture) or if User
Auth. is enabled, the account configured in the user's Folder Authentication setting will be used.
The destination's access logs:
Case A or Case C with SP=0: The access logs can be used to determine which user sent the scan.
Case B or Case C with SP=1: All access will be logged as the same user.

Ricoh MP 402SPF Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	1, 600 sheets
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Fax Capability	Yes
Maximum Paper Size	A4
Warm-up Time	21 seconds
Memory (RAM)	2 GB
Fax Transmission Speed	33.6 Kbps
Copy Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet, Wi-Fi
Control Panel	Touchscreen
Mobile Printing	Yes
Hard Disk Drive	320 GB (Optional)
Network Connectivity	Ethernet
Print Speed	Up to 42 ppm (Letter)
Copy Speed	Up to 42 cpm (Letter)