7. Set the export conditions.
• Specify whether to [Include] or [Exclude] the "Device Unique Information". "Device Unique
Information" includes the IP address, host name, fax number, etc.
•
Specify an encryption key.
8. Press [Run Export].
9. Press [OK].
10. Press [Exit].
11. Log out.
• If data export fails, the details of the error can be viewed in the log.
Importing Device Information
Import device information saved on an SD card.
1. Insert an SD card into the media slot on the side of the control panel.
2. Log in from the control panel as an administrator with all privileges.
3. Press [System Settings].
4. Press [Administrator Tools].
5. Press [ Next] three times.
Managing Device Information
255
To Next Page
Loading...
