Page Printer Initialization Sequence
Before printing begins, the host may determine characteristics of the printer and its resources and may
specify certain parameters related to subsequent printing.
Following is a typical sequence of initialization commands.
•
Sense Type and Model (STM) with ARQ
• XOH Obtain Printer Characteristics (OPC) with ARQ
• Set Home State (SHS)
• Logical Page Descriptor (LPD)
• Logical Page Position (LPP)
• Load Copy Control (LCC)
• Load Font Equivalence (LFE) with ARQ
2. Summary of IPDS Commands
42
To Next Page
Loading...
