Sense Type and Model
Causes the printer to place into the Special Data Area of the Acknowledge Reply (See p.10
"Acknowledgement Reply") a record containing type and model information and the functions the printer
supports.
This command is effectively a NOP if the ARQ bit is NOT ON in the command header.
Sense Type and Model
Offset Range Meaning
0 X'FF' Convention
1-2 Product Code
X'2707' Type 1 / Type 2 / Type 3
X'4028' 4028 Emulation (4028)
3 Model
X'01' Type 1
X'02' Type 2
X'03' Type 3
X'00' 4028 Emulation (Simplex)
X'12' 4028 Emulation (Duplex)
4-5 X'0000' Reserved
• To check which model you are using, see "Machine Types", Read This First.
Device-Control Command Set
Offset Range Meaning
0-1 X'nnnn' VECTOR LENGTH
2-3 X'C4C3' DEVICE CONTROL Command-Set ID
4-5 X'FF10' DC1 Subset ID
6-7 X'6001' MULTIPLE COPY and COPY-SUBGROUP support in LCC
1. Device Control Command Set
54
To Next Page
Loading...
