Ricoh MP 6002

Position Value
Off off
Left top lefttop
Right top righttop
Left top horiz lefttophorizland, lefttophorizport
Left top slant lefttopslantland, lefttopslantport
Left top vert lefttopvertland, lefttopvertport
Right top horiz righttophorizland, righttophorizport
Right top slant righttopslantland, righttopslantport
Right top vert righttopvertland, righttopvertport
Left 2 left2land, left2port
Right 2 right2land, right2port
Top 2 top2land, top2port
Booklet booklet
The following sample shows how to print with the staple on the upper left using finisher shift tray (host
name : nphost, file name : file1, finisher shift tray):
•
rsh
% rsh nphost print staple=lefttop,outbin=finishershift <file1
• rcp
% rcp file1 nphost:staple=lefttop,outbin=finishershift
• ftp
ftp> put file1 staple=lefttop,outbin=finishershift
Punch, Punchhole
Select the punch position for the output and the number of punch holes.
• When using this option, the optional finisher unit is required.
punch=value of punch position
Specifying the Device Option
39