Ricoh MP 6002

Position Value
Off off
Left
leftport
leftland
Right
rightport
rightland
Top
topport
topland
punchhole=value of punchhole
The available number of punch holes may vary depending on the type of Punch Kit installed. Specify an
appropriate value referring to the table below.
Number of punch holes Value
2 us2
3 us3
4 eu4, neu4
Multi multi
The following sample shows how to print with four punch holes on the left using finisher shift tray (host
name : nphost, file name : file1, finisher shift tray : finishershift).
•
rsh
% rsh nphost print punch=leftport,punchhole=eu4,outbin=
finishershift < file1
• rcp
% rcp file1 nphost:punch=leftport,punchhole=eu4,outbin=
finishershift
• ftp
ftp > put file1 punch=leftport,punchhole=eu4,outbin=finishershift
• When "punchhole" is not specified, the machine executes the punch function using the default
number of punch holes.
1. UNIX Configuration
40