2. Presentation Text Command Set
Presentation Text Commands
Name Command Sub-command Where to Look
Load Equivalence X'D61D' p.121 "Load
Equivalence"
Write Text X'D62D' p.121 "Write Text"
Load Equivalence
This command permits text-suppression values imbedded in text data stored within the printer to be
referenced externally using different values. For example, the Internal Suppression value of X'02' may
be referenced externally on a Load Copy Control as a X'06' provided that an appropriate Load
Equivalence command was previously received.
If more than 127 LE entries are specified, exception X'0202..02' is reported.
Offset Range Meaning Error Code
0-1 MAPPING TYPE X'02C6..0
2'
X'0100' Suppression Mapping
2-3 X'0001' -
X'00FF'
INTERNAL VALUE from BS..ES Pair X'02C1..0
2'
X'02C8..0
2'
4-5 X'0001' -
X'007F'
EXTERNAL VALUE from LCC X'02C8..0
2'
6-509 Zero or more additional entries analogous to Bytes 2-5
Write Text
In this Write Text description, references made to pages also apply to overlays and page segments.
The print data is a string of 1-byte code points. To determine the character raster pattern, the printer uses
the code point to identify the character metrics obtained from:
121
To Next Page
Loading...
