Error Code Cause Solution
L0612-005 Authentication failed because no
more users can be registered. (The
number of users registered in the
Address Book has reached
capacity.)
Ask the user administrator to delete
unused user accounts in the Address
Book.
L0707-001 An authentication error occurred
because the Address Book is being
used at another location.
Wait a few minutes and then try
again.
Integration Server authentication
Error Code Cause Solution
I0103-000 A TWAIN operation occurred
during authentication.
Make sure no other user is logged in
to the machine, and then try again.
I0104-000 Failed to decrypt password. 1. A password error occurred.
Make sure the password is entered
correctly.
2. Either [DES] or [AES] is selected
for "Driver Encryption Key:
Encryption Strength".
The administrator has restricted use
of simple encryption. You can use
the encryption key if it has been
specified in the driver.
3. A driver encryption key error
occurred.
Make sure that the encryption key is
correctly specified on the driver.
I0105-000 A login user name was not specified
but a DeskTopBinder operation was
performed.
Set the DeskTopBinder login user
name correctly.
I0206-002 A user attempted authentication from
an application on the "System
Settings" screen, where only the
administrator has authentication
ability.
Only the administrator has login
privileges on this screen.
Log in as a general user from the
application's login screen.
If Authentication Fails
295
To Next Page
Loading...
