Ricoh MP 6002

Settings User Mach N/W File Unset Set
Effective Protocol R R R/W R R/W R
NCP Delivery Protocol R R R/W R R/W R
NW Frame Type R R R/W R R/W R
SMB Computer Name R R R/W R R/W R
SMB Work Group R R R/W R R/W R
Ethernet Speed R R R/W R R/W R
LAN Type R R R/W R R/W R
Ping Command – – R/W – R/W R
Permit SNMPv3 Communication R R R/W R R/W R
Permit SSL / TLS Communication R R R/W R R/W R
Host Name R R R/W R R/W R
Machine Name R R R/W R R/W R
IEEE 802.1X Authentication for Ethernet R R R/W R R/W R
Restore IEEE 802.1X Authentication to
Defaults
– – R/W – R/W –
*1
When auto-obtain is set, the data is read-only.
*2
All administrators and users can run a test of connections.
Parallel Interface
Settings User Mach N/W File Unset Set
Parallel Timing R R/W R R R/W R
Parallel Communication Speed R R/W R R R/W R
Selection Signal Status R R/W R R R/W R
Input Prime R R/W R R R/W R
Bidirectional Communication R R/W R R R/W R
Signal Control R R/W R R R/W R
9. Checking Operation Privileges
310