Ricoh MP 6002

Paper type and weight Paper size Paper capacity
64–216 g/m
2
(17 lb. Bond–80 lb.
Cover)
Plain Paper–Thick Paper 2
*1
11 × 17 , 8
1
/
2
× 11 ,
8
1
/
4
× 13 , 8 × 13
8
1
/
2
× 13 , 8 × 10 ,
7
1
/
4
× 10
1
/
2
200 sheets
*1
If you want to make these sizes detectable, contact your service representative.
Paper Thickness
Paper Thickness
*1, *2
Paper weight
Plain Paper 52–81 g/m
2
(14–20 lb. Bond)
Middle Thick 82–103 g/m
2
(21–28 lb. Bond)
Thick Paper 1 104–169 g/m
2
(39 lb. Cover–90 lb. Index)
Thick Paper 2 170–216 g/m
2
(65–80 lb. Cover)
*1
Print quality will decrease if the paper you are using is close to the minimum or maximum weight.
Change the paper weight setting to thinner or thicker.
*2
When loading paper of 52–59 g/m
2
(14–15 lb. Bond), the edges may crease or the paper misfeed
depending on the paper type.
• Certain types of paper produce noise when delivered. This noise does not indicate a problem and
print quality is unaffected. (Glossy paper and OHP transparencies can produce noise when
delivered.)
•
The paper capacity described in the tables above is an example. Actual paper capacity might be
lower, depending on the paper type.
• When loading paper, make sure the stack height does not exceed the limit mark of the paper tray.
• If multiple sheet feeding occurs, fan sheets thoroughly or load sheets one by one from the bypass
tray.
• Flatten out curled sheets before loading them.
• When loading thick paper of 157–216 g/m2 (42 lb. Bond–80 lb. Cover), see p.146 "Thick
Paper".
9. Adding Paper and Toner
144