Ricoh MP 6002

Messages during Direct print from a removable memory device
Message Causes Solutions
"Cannot display files from
the selected memory
device."
The memory device used
cannot be recognized.
For details about the recommended
memory devices for the Direct printing
function from removable memory
devices, contact your service
representative. The USB flash memory
that features password protection or
other security features may not work
normally.
"The size of the selected
file(s) is too large."
• The size of the selected
file exceeds 1GB.
•
The total size of the
selected files exceeds
1GB.
Files or groups of files larger than 1GB
cannot be printed.
• When the total size of the multiple
files that are selected exceeds
1GB, select files separately.
• When the size of selected file
exceeds 1GB, print by using a
function other than the Direct
printing function from removable
memory devices.
You cannot select files of different
formats at the same time.
"Exceeded the limit value for
total data size of the
selected files. Cannot select
more files."
• The size of the selected
file exceeds 1GB.
• The total size of the
selected files exceeds
1GB.
Files or groups of files larger than 1GB
cannot be printed.
• When the total size of the multiple
files that are selected exceeds
1GB, select files separately.
• When the size of selected file
exceeds 1GB, print by using a
function other than the Direct
printing function from removable
memory devices.
You cannot select files of different
formats at the same time.
When Messages Are Displayed on the Control Panel
189