Ricoh MP 6002

Message Causes Solutions
"Duplex has been
cancelled."
Duplex printing was
canceled.
• Select the proper paper size for
the duplex function. For details
about paper, see "Specifications
for the Main Unit", Maintenance
and Specifications .
•
Change the setting for "Apply
Duplex" in [System Settings] to
enable duplex printing for the
paper tray. For details about
setting the "Apply Duplex", see
"Tray Paper Settings", Connecting
the Machine/ System Settings
.
"Error has occurred." A syntax error, etc.,
occurred.
Check that the PDF file is valid.
"Exceeded max. capacity of
Document Server. Cannot
store."
The hard disk became full
after a file was stored.
Delete some of the files stored in the
Document Server or reduce the size
that you want to send.
"Exceeded max. number of
files of Document Server.
Cannot store."
The maximum file capacity
of the Document Server was
exceeded.
Delete some of the files stored in the
Document Server.
"Exceeded max. number of
files to print for temporary /
stored jobs."
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum file capacity was
exceeded.
Delete unneeded files stored in the
machine.
"Exceeded max. number of
files. (Auto)"
While using the error job
store function to store
Normal Print jobs as Hold
Print files, the maximum file
capacity for file storage or
Hold Print file management
(automatic) was exceeded.
Delete Hold Print files (automatic) or
unneeded files stored in the machine.
"Exceeded the maximum
number of multi-sheet fold.
The job has been
cancelled."
The maximum number of
multi-sheet fold was
exceeded.
Specify fewer sheets for the multi-sheet
fold function.
Multi-sheet folding can be applied to a
maximum of three sheets at once.
When Messages Are Displayed on the Control Panel
193