Ricoh MP 6002

Loaded Font Command Set (LF1) - Double Byte
Offset Range Meaning
0-1 X'0012' VECTOR LENGTH
2-3 X'C3C6' LOADED FONT Command Set
4-5 X'FF10' LF1 subset - fully described font + font index
6-7 X'A004' 4 CHARACTER ROTATIONS (LFI command)
8-9 X'B001' Double-Byte coded fonts supported
10-11 X'B002' LFI UNDERSCORE Width and Position USED
12-13 X'C005' BOUNDED BOX RASTER FONT TECHNOLOGY
14-15 X'C100' FIXED METRICS
16-17 X'C101' RELATIVE METRICS
Loaded Font Command Set (LF3) - Single Byte
Offset Range Meaning
0-1 X'0014' VECTOR LENGTH
2-3 X'C3C6' LOADED FONT Command Set
4-5 X'FF30' LF3 subset - code page + font character set
6-7 X'A004' 4 CHARACTER ROTATIONS (LFI command)
8-9 X'B002' LFI UNDERSCORE Width and Position USED
10-11 X'B003' GRID PARTS REQUIRED IN LFC, LFCSC and LCPC COMMANDS
12-13 X'B004' Default Character Parameters in LCPC Supported
14-15 X'B005' Extended (Unicode mapping) code page support
16-17 X'C01F' ADOBE TYPE-1 PFB OUTLINE FONT TECHNOLOGY
18-19 X'C101' RELATIVE METRICS
1. Device Control Command Set
64