Ricoh MP 6002 - Page 754

Offset Range Meaning Error Code
27 X'00' Reserved
28-29 PIXEL-Units per UNIT BASE in the X direction (only
applicable if byte 10 = x'02')
X'0288..0
2'
X'0960' 2400 Units per 10 in. (240 dpi)
X'0BB8' 3000 Units per 10 in. (300 dpi)
X'1770' 6000 Units per 10 in. (600 dpi)
30-31 PIXEL-Units per UNIT BASE in the Y direction (only
applicable if byte 10 = x'02')
X'0289..0
2'
X'0960' 2400 Units per 10 in. (240 dpi)
X'0BB8' 3000 Units per 10 in. (300 dpi)
X'1770' 6000 Units per 10 in. (600 dpi)
32-33 X'0001' -
X'7FFF'
RELATIVE METRIC MULTIPLYING FACTOR X'028A..
02'
34-35 X'nnnn' FGID (ignored)
36 STAGEABILITY X'0220..0
2'
X'01' Font is not stageable (retired)
37 Bit 0: 0/1 INTENDED USE FLAGS: Not intended for MICR printing/
Intended for MICR printing (If MICR Installed)
Bits 1-7:
0000000
Reserved
38-39 X'nnnn' Font width (ignored)
40-n Zero or more CHARACTER PATTERN DESCRIPTORS in
the following format
+ 0-1
bytes
X'0000' -
X'7FFF'
CHARACTER BOX X SIZE X'0226..0
2'
+ 2-3
bytes
X'0000' -
X'7FFF'
CHARACTER BOX Y SIZE X'0227..0
2'
10. Loaded Font Command Set
220