6. Select [User Code Auth.].
If you do not want to use user authentication management, select [Off].
7. In "Functions to Restrict", select the functions that you want to restrict.
If the function you want to select is not displayed, press [ Next].
The selected functions are subject to User Code authentication. User Code authentication is not
applied to the functions not selected.
For details about limiting available functions for individuals or groups, see p.80 "Limiting
Available Functions".
If you do not want to specify printer job authentication, proceed to step 13.
8. Under "Functions to Restrict", either deselect [Printer: PC Control] or select [Printer].
9. Select the "Printer Job Authentication" level.
2. Configuring User Authentication
34
To Next Page
Loading...
