5. Press [Auto Erase Memory Setting].
6. Press [On].
7. Select the method of overwriting.
If you select [NSA] or [DoD], proceed to step 10.
If you select [Random Numbers], proceed to step 8.
8. Press [Change].
9. Enter the number of times that you want to overwrite using the number keys, and then
press [ ].
10. Press [OK].
Auto Erase Memory is set.
11. Log out.
• If you specify to both overwrite and encrypt the data, the data will all be encrypted.
Canceling Auto Erase Memory
1. Follow steps 1 to 5 in "Using Auto Erase Memory".
2. Press [Off].
Deleting Data on the Hard Disk
111
To Next Page
Loading...
