3. Press [Unauthorized Copy Preventn.].
If it is not displayed, press [ ] at the top right of the display.
4. Press [Unauthorized Copy Prevention Setting].
5. Press [On], and then press [OK].
6. Press [Setting Priority (Drvr/Cmnd/Mach)].
7. Select the range within which the user can specify the pattern to be printed using the
printer driver.
• [Driver / Command]
Specifies all the content of the pattern to be printed using the printer driver.
•
[Driver/Command (Most Settgs)]
Specifies the settings other than pattern type and density using the printer driver.
6. Preventing the Leaking of Documents
196
To Next Page
Loading...
