Disabling log transfer to the log collection server
Use the following procedure to disable log transfer from the machine to the log collection server. Note
that you can change the log transfer setting to [Off] only if it is already set to [On].
For details about the log collection server, contact your sales representative.
For details about the transfer log setting, see the log collection server manual.
1. The machine administrator logs in from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] three times.
5. Press [Transfer Log Setting].
6. Press [Off].
7. Press [OK].
8. Log out.
Specifying Delete All Logs
1. The machine administrator logs in from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] three times.
7. Managing the Machine
208
To Next Page
Loading...
