EasyManuals Logo

Ricoh MP 6503 Series User Manual

Ricoh MP 6503 Series
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
4. Press [Immed. TX].
5. Place the original into the ADF.
6. Select the scan settings you require.
7. Specify a destination.
If you make a mistake, press [Clear], and then enter again.
8. Press [Start].
Procedure for Sending Originals Using the Exposure Glass (classic)
1. Press [Immed. TX].
2. Place the first page face down on the exposure glass.
3. Specify a destination.
4. Make the scan settings you require.
5. Press [Start].
6. Place the next original on the exposure glass within 10 seconds when you send multiple
originals, and then repeat Steps 4 and 5.
Repeat this step for each page.
4. Fax
98

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh MP 6503 Series and is the answer not in the manual?

Ricoh MP 6503 Series Specifications

General IconGeneral
Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Hard Disk Drive320 GB
Power Source220 - 240 V, 50/60 Hz
Supported Operating SystemsWindows, Mac OS, Linux
Monthly Duty Cycle300, 000 pages
TypeMultifunction Printer
Print Speed65 ppm
ConnectivityUSB 2.0, Ethernet
Supported Paper SizesA3, A4, A5, B4, B5, Legal, Letter, Executive
First Print Speed3.2 seconds
Paper Weight52 - 300 gsm
Memory2 GB
Scanning Speed120 ipm
Scan Resolution600 dpi

Related product manuals