Ricoh MP 6503 Series User Manual

Recommended Paper
Recommended Paper Sizes and Types
This section describes recommended paper sizes and types.
• If you use paper that curls, either because it is too dry or too damp, a staple clogging or paper jam
may occur.
• Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a
misfeed.
• When you load OHP transparencies, check the front and back of the sheets, and place them
correctly, or a misfeed might occur.
Tray 1
Paper type and weight Paper size Paper capacity
52–256 g/m
2
(14 lb. Bond–
140 lb. Index)
Plain Paper–Thick Paper 3
A4
8
1
/
2
× 11
1,550 sheets × 2
52–256 g/m
2
(14 lb. Bond–
140 lb. Index)
Plain Paper–Thick Paper 3
*1
8
1
/
2
× 11
A4
1,550 sheets × 2
*1
To load paper any of the sizes specified above, contact your service representative.
Tray 1 (A3/11 × 17 tray unit)
Paper type and weight Paper size Paper capacity
52–169 g/m
2
(14–90 lb. Bond)
Plain Paper–Thick Paper 1
A3
11 × 17
1,000 sheets
9. Adding Paper and Toner
160

Ricoh MP 6503 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Hard Disk Drive	320 GB
Power Source	220 - 240 V, 50/60 Hz
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	300, 000 pages
Type	Multifunction Printer
Print Speed	65 ppm
Connectivity	USB 2.0, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive
First Print Speed	3.2 seconds
Paper Weight	52 - 300 gsm
Memory	2 GB
Scanning Speed	120 ipm
Scan Resolution	600 dpi