Ricoh MP 6503 Series User Manual

Loading Paper into the Large Capacity Tray
• (mainly Europe and Asia)
• The LCT can hold A4 paper only. If you want to print on 8
1
/
2
× 11 or B5 JIS from the LCT,
contact your service representative.
• (mainly North America)
• The LCT can hold 8
1
/
2
× 11 paper only. If you want to print on A4 or B5 JIS from the LCT,
contact your service representative.
• The extension unit is required to load A4 , B4 JIS , 8
1
/
2
× 14 , or 8
1
/
2
× 11 .
1. Open the top cover of the LCT.
DPZ015
2. Load paper into the paper tray with the print side up and place it against the left side of
the tray.
Do not stack paper over the limit mark.
DPZ026
3. Press the [Down] key.
The key blinks while the bottom plate is moving down.
9. Adding Paper and Toner
156

Ricoh MP 6503 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Hard Disk Drive	320 GB
Power Source	220 - 240 V, 50/60 Hz
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	300, 000 pages
Type	Multifunction Printer
Print Speed	65 ppm
Connectivity	USB 2.0, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive
First Print Speed	3.2 seconds
Paper Weight	52 - 300 gsm
Memory	2 GB
Scanning Speed	120 ipm
Scan Resolution	600 dpi