Ricoh MP 6503 Series User Manual

Using the Quick Print Release Function
The quick applications that are installed on this machine allow you to operate some of the printer
functions from a single screen. Using the Quick Print Release function, you can view the list of documents
that are stored on the machine. From the list, any documents can be selected and printed. The print
settings of the document and the date and time to send the document can be changed as well.
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Press the [Quick Print Release] icon.
3. Select the user as required.
4. If necessary, enter the password for the documents.
The list of both the documents that have not password specified, and that matches the entered
password is displayed.
5. Select documents.
More than one document can be selected at one time.
You can perform the following operations on the selected documents:
• Delete
Deletes the selected documents.
• Preview
Shows the preview image of the first page of the document.
• Change Setg
Configures the print settings of the document.
• File Managmnt
Specifies the date and time to send the document, and the password.
The file information cannot be modified when more than one document is selected.
6. Press [Print].
Using the Quick Print Release Function
117

Ricoh MP 6503 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Hard Disk Drive	320 GB
Power Source	220 - 240 V, 50/60 Hz
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	300, 000 pages
Type	Multifunction Printer
Print Speed	65 ppm
Connectivity	USB 2.0, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive
First Print Speed	3.2 seconds
Paper Weight	52 - 300 gsm
Memory	2 GB
Scanning Speed	120 ipm
Scan Resolution	600 dpi