When Using the Copy Application
About how to use the application's screen, see page 43 "[Copy] Screen".
When Using the Copier (Classic) Application
For details about how to use the Classic Copier function, see page 78 "Procedure for specifying
the original and copy orientation (classic)".
Procedure for specifying the original and copy orientation (classic)
1. Press [Dup./Combine/Series].
2. Make sure that [Duplex] is selected. If [Duplex] is not selected, press [Duplex].
3. Press [Orientation].
4. Select [Top to Top] or [Top to Bottom] for [Original:] if the original is two-sided.
5. Select [Top to Top] or [Top to Bottom] for [Copy:].
6. Press [OK].
3. Copy
78
To Next Page
Loading...
