Ricoh MP 9003 Series User Manual

Message Cause Solution
"Check whether there are
any network problems."
[15-11]
Cannot find the DNS server
or POP3/IMAP4 server.
• Check that the following settings
in [System Settings] are listed
correctly.
• IP address of the DNS
Server
• the server name or IP
address of the POP3/
IMAP4 server
• the port number of the
POP3/IMAP4 server
• Reception Protocol
For details about these settings,
see "Interface Settings" or "File
Transfer", Connecting the
Machine/ System Settings.
• Check that the LAN cable is
correctly connected to the
machine.
• For details about network
problems, contact your
administrator.
"Check whether there are
any network problems."
[15-12]
Cannot log in to the POP3/
IMAP4 server.
• Check that the following settings
in [System Settings] are listed
correctly.
• the user name and password
for [Fax Email Account]
• the user name and password
for POP before SMTP
authentication
For details about these settings,
see "File Transfer", Connecting the
Machine/ System Settings.
• For details about network
problems, contact your
administrator.
Messages Displayed When You Use the Facsimile Function
197

Ricoh MP 9003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Standard Features	Print, Copy, Scan
Memory (RAM)	2 GB
Hard Disk Drive	320 GB
Copy Resolution	600 x 600 dpi
Print Speed	90 ppm
Paper Capacity	8, 300 sheets maximum
Paper Size	A3, A4, A5, B4, B5
Paper Weight	52 to 300 g/m²
Optional Features	Fax, Additional Paper Trays, Finisher Options
Power Source	AC 220-240V, 50/60Hz
Scan Resolution	600 x 600 dpi
Copy Speed	90 ppm
Fax Resolution	200 x 200 dpi
Network Connectivity	Ethernet