Ricoh MP 9003 Series User Manual

Message Cause Solution
"HDD Full" The hard disk became full
while you were printing a
Sample Print, Locked Print,
Hold Print, or Stored Print
file.
Delete unneeded files stored on the
machine.
Alternatively, reduce the data size of
the Sample Print, Locked Print, Hold
Print, or Stored Print file.
"HDD is full. (Auto)" The hard disk became full
while you were using the
error job store function to
store Normal Print jobs as
Hold Print files.
Delete unneeded files stored on the
machine.
Alternatively, reduce the data size of
the Temporary Print file and/or the
Stored Print file.
When there is not enough memory
Message Cause Solution
"84: Error" There is no work area
available for image
processing.
Decrease the number of files sent to the
machine.
When there is a problem with a parameter
Message Cause Solution
"86: Error" Parameters of the control
code are invalid.
Check the print settings.
When the user lacks privileges to perform an operation
Message Cause Solution
"No response from the
server. Authentication has
failed."
A timeout occurred while
connection to the server was
being established for LDAP
authentication or Windows
Authentication.
Check the status of the server.
10. Troubleshooting
210

Ricoh MP 9003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Standard Features	Print, Copy, Scan
Memory (RAM)	2 GB
Hard Disk Drive	320 GB
Copy Resolution	600 x 600 dpi
Print Speed	90 ppm
Paper Capacity	8, 300 sheets maximum
Paper Size	A3, A4, A5, B4, B5
Paper Weight	52 to 300 g/m²
Optional Features	Fax, Additional Paper Trays, Finisher Options
Power Source	AC 220-240V, 50/60Hz
Scan Resolution	600 x 600 dpi
Copy Speed	90 ppm
Fax Resolution	200 x 200 dpi
Network Connectivity	Ethernet