Ricoh MP 9003 Series User Manual

7. A3/11 × 17 tray unit
You can load paper sizes up to A3 or 11 × 17 in Tray 1 using this unit. If you install the A3/11 × 17 tray
unit on your machine, you cannot use it as a tandem tray.
8. Copy tray
If you select this as the output tray, copied/printed paper and fax messages are delivered here face down.
9. Interposer (Finisher SR4080)
Inserts cover or slip sheets into copied or printed paper.
10. Finisher SR4080
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
11. Output jogger (Finisher SR4080)
Sorts, stacks, staples, and punches multiple sheets of paper. The saddle stitch function can staple multiple
sheets of paper in the center and fold them into booklets. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
• Finisher booklet tray
12. Booklet Finisher SR4130
Jogs the sheets delivered to the finisher shift tray.
13. Output jogger (Finisher SR4120, Booklet Finisher SR4130)
Jogs the sheets delivered to the finisher shift tray.
14. Mailbox
Sorts printed paper. Consists of Mailbox output trays 1 - 9.
Guide to Functions of the Machine's Options
33

Ricoh MP 9003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Standard Features	Print, Copy, Scan
Memory (RAM)	2 GB
Hard Disk Drive	320 GB
Copy Resolution	600 x 600 dpi
Print Speed	90 ppm
Paper Capacity	8, 300 sheets maximum
Paper Size	A3, A4, A5, B4, B5
Paper Weight	52 to 300 g/m²
Optional Features	Fax, Additional Paper Trays, Finisher Options
Power Source	AC 220-240V, 50/60Hz
Scan Resolution	600 x 600 dpi
Copy Speed	90 ppm
Fax Resolution	200 x 200 dpi
Network Connectivity	Ethernet