To Next PageTo Next PageWhat to do if error message remains on Ricoh All in One Printer after removing misfed paper?
If an error message remains on your Ricoh All in One Printer even after removing misfed paper, it means paper is still jammed in the tray. Remove the jammed paper by following the procedures displayed on the control panel.
Why does my Ricoh MP C2003 have frequent misfeeds?
Misfeeds can occur frequently in your Ricoh All in One Printer if you are using curled paper, which can also cause soiled paper edges or slipped positions during staple or stack printing. To resolve this: * Straighten out the curl of the paper. * Load the paper upside down, ensuring the curled edges face downward. * Ensure the tray's side or end fences are properly set. If the issue persists, remove the misfed paper and double-check the side or end fences.
What to do if Ricoh MP C2003 cannot connect to the network?
If your Ricoh All in One Printer is unable to connect to the network, ensure the machine is correctly connected and properly set up. If the issue persists, contact your administrator or service representative for assistance.
What to do if error message remains after closing the cover on Ricoh MP C2003?
If an error message remains displayed on your Ricoh All in One Printer even after closing the indicated cover, it means that there are other covers that are not indicated still open. Close all the covers of the machine.
Why I cannot print in duplex mode with my Ricoh MP C2003?
If you cannot print in duplex mode on your Ricoh All in One Printer, it might be because the selected paper tray is not set for duplex printing. To fix this, change the setting for "Apply Duplex" in [System Settings] to enable duplex printing for the paper tray. Another reason could be that you have selected a paper type that cannot be used for duplex printing, so select a suitable paper type in [System Settings].
What to do if error message remains after removing misfed paper from Ricoh MP C2003?
If an error message remains on your Ricoh All in One Printer, even after removing misfed paper, it indicates that paper is still jammed in the tray. Remove the jammed paper by following the procedures displayed on the control panel.
Why are images printed on the reverse side of the paper by my Ricoh MP C2003 All in One Printer?
If original images are printed on the reverse side of the paper when using your Ricoh All in One Printer, it is likely that you have loaded the paper incorrectly. Load the paper correctly.
What to do if error occurred when changing Address Book on Ricoh MP C2003 All in One Printer?
If an error has occurred when the Address Book is changed from the display panel or Web Image Monitor on your Ricoh All in One Printer, it is because the Address Book cannot be changed while deleting the multiple stored documents. Wait a while, and then retry the operation.
Why the Address Book cannot be changed from the display panel on Ricoh MP C2003?
If the Address Book cannot be changed from the display panel on your Ricoh All in One Printer, it might be because the Address Book is being backed up from Web Image Monitor or other tools running on the computer. Wait until the Address Book backup is complete, and then try to change the Address Book again. If an SC997 error occurs, press [Exit].
Why are items missing from the User Tools menu on Ricoh MP C2003 after turning it on?
If the machine has just been turned on and the User Tools screen is displayed, but the User Tools menu has items missing on your Ricoh All in One Printer, it means that functions other than the copier function are not yet ready. The time required varies by function. Functions appear in the User Tools menu when they become ready for use. Wait a little longer.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Maximum Paper Size | A3 |
| Copy Resolution | 600 x 600 dpi |
| Duplex Printing | Yes |
| Print Technology | Laser |
| Print Speed | 20 ppm (A4) |
| Scanner Resolution | 600 dpi |
| Network Connectivity | Ethernet |
| Functions | Print, Copy, Scan |
| Operating System Compatibility | Windows, Mac, Linux |
| Scan Speed | 54 images per minute |
| Control Panel | 9-inch color touchscreen |
