Ricoh MP C2800 - Page 269

4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Select the name whose IP-Fax destination you want to change.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.
7. Press [Fax Dest.].
8. Press [Change] under "Fax Destination".
9. Enter the new destination, and then press [OK].
10. Press [OK].
11. Press [Exit].
12. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Registering Names".
• p.245 "Registering Names"
To change the IP-Fax Destination
This section describes how to change a registered IP-Fax destination.
1. Press [Change] under "Use Name as".
2. Enter the new destination, and then press [OK].
To change the protocol
This section describes how to select the protocol.
1. Press [Select Line].
2. Select [H.323] or [SIP].
Fax Destination
267
5