Registering SMTP and LDAP Authentication
This section describes how to register SMTP and LDAP Authentication.
SMTP Authentication
This section describes how to register SMTP Authentication.
For each user registered in the Address Book, you can register a login user name and login password to
be used when accessing an SMTP server.
To use an SMTP server, you need to program it beforehand.
• When [Do not Specify] is selected for SMTP Authentication the User Name and Password that you
have specified in SMTP Authentication of File Transfer settings applies. For details, see "File Transfer".
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Press the name you want to register or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.
7. Press [Auth. Info].
8. Press [Specify Other Auth. Info] under "SMTP Authentication".
5. Registering Addresses and Users for Facsimile/Scanner Functions
306
To Next Page
Loading...
Need help?
General
